Furnace or Heat Pump troubles? Gas or Electric heating? Not warm enough in your home or business? No matter which type of heating comfort system you are using, Desert Comfort Mechanical is ready to bring you total comfort.

Our professional team of heating technicians are available 24 hours a day, 7 days a week; So if you need emergency heating repair, we are here for you.

In the fall and winter times, our service trucks are stocked with over $3000 in heating parts to avaoid unnecessary trips to suppliers while you wait for your heater to be fixed.

In the same manner that we handle our air conditioning repairs, our trained technicians will accurately diagnose your heater, heat pump or furnace and present you with a repair estimate.

Desert Comfort Mechanical's technicians are not authorized to start a repair without you seeing the repair estimate and you authorizing the repair first.

We service all brands, makes and models of heaters, furnaces, heat pumps and electric heat strips systems.

All heating repairs performed by Desert Comfort Mechanical are 100% guaranteed and backed by a part and labor warranty.

Did you know that a cracked heat exchanger in furnaces is the #1 cause of carbon monoxide poisoning in homes and could be a potential fire hazard. Don't take the chance and have you furnace professionally inspected by a Desert Comfort Mechanical technician.

The furnace inspection checklist:

1. Gas Furnace Cabinet
2. Control Board/ Electronics
3. Inducer Fan Motor Capacitor
4. Inducer Fan Motor Wheel
5. Inducer Fan Motor
6. Vacuum Tubing
7. Vacuum Switch
8. Gas Valve
9. Gas Piping Leaks
10. Ignition Device
11. Flame Sensor
12. Burners
13. Gas Distributors
14. Gas Pressure
15. Limit Switches
16. Flame Roll Out Switches
17. Heat Exchanger Condition
18. Flue Pipe
19. CO Detection
20. Low Voltage Connections
21. High Voltage Connections
22. Blower Motor Amps
23. Blower Motor Volts
24. Blower Motor
25. Blower Motor Wheel
26. Blower Motor Capacitor
27. Blower Assembly Cleanliness
28. Return/ Supply Plenums
29. Proper Air Flow
30. Air Filters

Your heat pump system uses the same parts in heating that it uses in cooling. The inspection process is very similar to the air conditioning inspection. The addition to defrost relays, defrost sensor checks and proper reversing valve operation is the only difference. Whether your heat pump is a split system (condenser outside and air handler in the attic or closet) or a package unit (one full unit usually on the roof) the inspection will include:

Condensing Section:

1. Condensing section cabinet
2. Condenser pan
3. Condenser coil (cleanliness)
4. Condenser coil (leaks)
5. Condenser coil (fins)
6. Condenser fan motor
7. Condenser fan blades
8. Contactor
9. Capacitors
10. Electronics/ wiring/ terminals
11. System amperage
12. Compressor amperage
13. Compressor terminals
14. Compressor temperature
15. Time delay
16. Temperature differential
17. Refrigerant level/pressures
18. Saturation temperatures
19. Refrigeration service ports
20. Leak search required?
21. Refrigerant line set
22. Electrical disconnect
23. Wiring from disconect to heat pump
24. Thermostat wiring
25. Defrost sensors
26. Defrost relays
27. Reversing valve
28. Compressor saver
29. Surge/ Lightning protection

Air Handling Section:

1. Air filter
2. Air handler cabinet (cleanliness)
3. Supply & return plenums
4. Blower motor
5. Blower wheel
6. Blower motor capacitor
7. Evaporator coil (cleanliness)
8. Evaporator coil (fins)
9. Wiring
10. Thermostat
11. Circuit boards/ electronics
12. System sterilyzer stage 1
13. System sterilizer stage 2
14. System sterilizer stage 3

Desert Comfort Mechanical is available for emergency Heating repairs 24hrs a day, 7 days a week. Just call the office line at 480-483-3099 and if you are calling after normal business hours, our repair lines are forwarded to our on call heating technician. Our technician will be able to answer all your  Heating questions and schedule a time to come repair your Heating system.